SFF 8639 To SFF 8643 Serial Attached SCSI Cable , Black SAS 68 Pin
30AWG Internal Mini SAS 36pin (SFF-8643 ) Male to SAS 68pin + SATA 15pin Forward Breakout Cable - Black
Serial Attached SCSI (SAS) is a high-speed data storage interface
designed for high-throughput and fast data access. Intended
primarily for data storage centers, the SAS interface is backwards
compatible with SATA. This allows the user to mix more expensive,
lower-capacity SAS drives for applications that require faster data
access and higher reliability, with lower-cost, higher-capacity
SATA drives for applications with lower access speed requirements.
Vision carries a full line of quality SAS cables with connectors
for every possible application, both internal and external.
This 1/2 meter long cable uses 30 AWG wires and is intended for
internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug
with locking latch on one end and has four 68-pin SAS +SATA 15pin
plugs on the other, allowing you to connect four SATA drives to an
SAS controller. This is a Forward Breakout cable, meaning that it
is intended to connect to a host/controller on the SAS end and to
drives on the SATA end.
HD Mini SAS 68P+SATA 15P Straight to HD Mini SAS 36P Straight:
|1. Series: HD Mini SAS.|
|2. Cable Length: 1.0 meters.|
|3. Wire Size: 30AWG, Tinned copper, OD 0. 9*2.3mm.|
|4. Lock to Mating Part: With Latch.|
|5. Plating: Au 30u'' min over Ni 100u'' min .|
|6. Color: Over mold Black.|
|7. Flammability: Cable Horizontal flame, PCB 94V-0, PBT 94V-0.|
|8. Environmental Compliance: RoHS.|
Features and Benefits:
1. Transmission rate 12 Gbps.
2. Meet SAS3.0 specification.
1. Mating Force and Unmating Force
2. Condition: EIA 364-13. Insert and extract at a speed of
3. Mating Force: 59 N maximum.
4. Unmating Force: 12 N minimum.
1. Contact Resistance
30mohm max. initial, 15mohm maximum after stress test.
2. Dielectric Withstanding Voltage
500 VAC for 1 minute no breakdown.
3. Insulation Resistance
1000 Mega ohms minimum.
1. Mated Connector Impedance: 100 ohm±15%
|2. Cable Absolute Impedance: 100 ohm±10%|
|3. Cable Pair Matching: ±5 ohm|
|4. Common Mode Impedance: 25 to 40 ohms|
|5. Insertion loss: -6dB maximum up to 4.5 GHz, 11dB maximum up to
|6. Crosstalk: -35 dB up to 6GHz|
|1. Fully integrated press-fit design of the container, provides a
step placement PCB.|
|2. Multi-port function added to allow or 4 x 8 x cable is mated
1-by-2 or 1-by-4 integrated connector.|
|3. Integrated container design can be integrated into the radiator,
allowing hot solutions long-reach, 4.|
|4. Passive - and active-copper cable options available, the ability
to extend the reach of copper wire and active.|
|5. 4 x 8 x backshell options and more flexible cable options.|
|6. Highest-density AOC design, almost double the current density
QSFP + AOCs, allows you to choose to use more ports.|
|7. Cable is in line with SAS-3 (12 gbp s) (system and optical-mode
capability), InfiniBand * (10 gbp s), Ethernet (10 gbp s) and other
agreements. Meet the next generation as well as many existing
Data Storage, RAID (Redundant Array of Independent Disks ), Workstations, Rack-mount server, Servers, Storage rack, Solid State Disk.